2. The Food Safety Plan - HACCP
2.1. Appropriate facilities and procedures shall be in place to control the risk of chemical or physical contamination of product.
FUNDAMENTAL
1
1
Clause 2.1.1
The HACCP or food safety plan shall be developed and managed by a multi-disciplinary food safety team that includes those responsible for quality assurance, technical management, production operations, engineering and other relevant functions.
Clause 2.10
Establish a Monitoring System for each CCP (equivalent to Codex Alimentarius Step 9, Principle 4)
| Outcome | Docs | Actions | Notes | |||||
|---|---|---|---|---|---|---|---|---|
| Yes | No | N/A |
2.2. Calibration and Control of Measuring and Monitoring Devices
FUNDAMENTAL
1
1
Clause 2.2.1
The site shall establish and maintain environmental and operational programmes necessary to create an environment suitable to produce safe and legal food products (prerequisite programmes). As a guide these may include the following, although this is not an exhaustive list:
2.3. Chemical Control
FUNDAMENTAL
1
1
Clause 2.3.1
A full description for each product or group of products shall be developed, which includes all relevant information on food safety. As a guide, this may include the following, although this is not an exhaustive list:
Clause 2.3.2
All relevant information needed to conduct the hazard analysis shall be collected, maintained, documented and updated. The company will ensure that the HACCP or food safety plan is based on comprehensive information sources, which are referenced and available on request. As a guide, this may include the following, although this is not an exhaustive list:
2.4. Cleaning In Place (CIP)
FUNDAMENTAL
1
1
Clause 2.4.1
The intended use of the product by the customer, and any known alternative use, shall be described, defining the consumer target groups, including the suitability of the product for vulnerable groups of the population (e.g. infants, elderly, allergy sufferers).
2.5. Complaint-handling
FUNDAMENTAL
1
1
Clause 2.5.1
A flow diagram shall be prepared to cover each product, product category or process. This shall set out all aspects of the food process operation within the HACCP or food safety plan scope, from raw material receipt through to processing, storage and distribution. As a guide, this should include the following, although this is not an exhaustive list:
2.6. Construct a Process Flow Diagram (equivalent to Codex Alimentarius Step 4)
FUNDAMENTAL
1
1
Clause 2.6.1
The HACCP food safety team shall verify the accuracy of the flow diagrams by on-site audit and challenge at least annually. Daily and seasonal variations shall be considered and evaluated. Records of verified flow diagrams shall be maintained.
2.7. Container Cleanliness -Glass jars, cans and other rigid containers
FUNDAMENTAL
1
1
Clause 2.7.1
The HACCP food safety team shall identify and record all the potential hazards that are reasonably expected to occur at each step in relation to product, process and facilities. This shall include hazards present in raw materials, those introduced during the process or surviving the process steps, and consideration of the following types of hazard:
Clause 2.7.2
The HACCP food safety team shall conduct a hazard analysis to identify hazards which need to be prevented, eliminated or reduced to acceptable levels. Consideration shall be given to the following:
Clause 2.7.3
The HACCP food safety team shall consider the control measures necessary to prevent or eliminate a food safety hazard or reduce it to an acceptable level. Where the control is achieved through existing prerequisite programmes, this shall be stated and the adequacy of the programme to control the specific hazard validated. Consideration may be given to using more than one control measure.
2.8. Control of Non-conforming Product
FUNDAMENTAL
1
1
Clause 2.8.1
For each hazard that requires control, control points shall be reviewed to identify those that are critical. This requires a logical approach and may be facilitated by use of a decision tree. Critical control points (CCPs) shall be those control points which are required in order to prevent or eliminate a food safety hazard or reduce it to an acceptable level. If a hazard is identified at a step where control is necessary for safety but the control does not exist, the product or process shall be modified at that step, or at an earlier step, to provide a control measure.
2.9. Product Legality
FUNDAMENTAL
1
1
Clause 2.9.1
For each CCP, the appropriate critical limits shall be defined in order to identify clearly whether the process is in or out of control. Critical limits shall be:
Clause 2.9.2
The HACCP food safety team shall validate each CCP. Documented evidence shall show that the control measures selected and critical limits identified are capable of consistently controlling the hazard to the specified acceptable level.
2.10. Product labelling shall comply with the appropriate legal requirements and contain information to enable the safe handling, display, storage and preparation of the product within the food supply chain or by the customer.
FUNDAMENTAL
1
1
Clause 2.10.1
A monitoring procedure shall be established for each CCP to ensure compliance with critical limits. The monitoring system shall be able to detect loss of control of CCPs and, wherever possible, provide information in time for corrective action to be taken. As a guide, consideration may be given to the following, although this is not an exhaustive list:
Clause 2.10.2
Records associated with the monitoring of each CCP shall include the date, time and result of measurement and shall be signed by the person responsible for the monitoring and verified, when appropriate, by an authorised person. Where records are in electronic form, there shall be evidence that records have been checked and verified.
2.11. Approval and Performance Monitoring of Manufacturers/Packers of Traded Food Products
FUNDAMENTAL
1
1
Clause 2.11.1
The HACCP food safety team shall specify and document the corrective action to be taken when monitored results indicate a failure to meet a control limit, or when monitored results indicate a trend towards loss of control. This shall include the action to be taken by nominated personnel with regard to any products that have been manufactured during the period when the process was out of control.
2.13. Building Fabric in High-Risk and High-Care Zones
FUNDAMENTAL
1
1
Clause 2.13.1
Documentation and record-keeping shall be sufficient to enable the site to verify that the HACCP and food safety controls, including controls managed by prerequisite programmes, are in place and maintained.
2.14. Building Fabric, Raw Material Handling, Preparation, Processing, Packing and Storage Areas
FUNDAMENTAL
1
1
Clause 2.14.1
The HACCP food safety team shall review the HACCP or food safety plan and prerequisite programmes at least annually and prior to any changes which may affect food safety. As a guide, these may include the following, although this is not an exhaustive list: